Electronic Pan and Tilt Head Pro SK-ECH04

  • تضمین بهترین قیمت بازار
  • پشتیبانی عالی ۲۴ ساعته، ۷ روز هفته
  • بازگشت وجه در صورت عدم رضایت
  • اصالت کالاها از برترین برندها
  • تحویل سریع در کمترین زمان ممکن

تماس بگیرید!

Sevenoak SK-ECH04 is a 2 axis remote controlled Electronic ball head designed for use on Jib Arms, Tripods or sliders. It features adjustable positioning on 2 axis to ensure that the center of gravity of the camera falls correctly within the pan and tilt head to put the minimum load on the DC motors on 2 axis as well as providing the smoothest motion as a result of this design. The controller comes with SK-ECH04 has a joystick that gives the head precision pan and tilt movement in either direction from a slow crawl up to the required speed. The Joystick will also pan and tilt simultaneously. Further the pan and tilt controller also has variable speed control for both axis to adjust for sensitivity and speed of motion, there are also switches to change the direction of the joystick control and an on/off switch.  This device comes with a 12V AC adapter. The head will pan and tilt through 360 degrees, this enables the camera to point directly upwards or downwards when required. It is driven by two custom-geared motors. The motor drive can be easily disengaged to enable the camera to be balanced correctly on the camera plate. The head's camera plate is adjustable for different sizes of camera and will support up to 10kg. Joystick Control Box The Joystick Control gives the head precision pan and tilt movement in either direction from a slow crawl up to the required speed. The Joystick will also pan and tilt simultaneously. On the side of the control box is a variable speed controller, so you can set the maximum speed for better control, there are also switches to change the direction of the joystick control and an on & off switch. On the front of the control box are sockets for the control cables, 12V DC in and two motor sockets. Led lights indicate when the unit is switched on and when the internal battery is on charge. The head is powered by a supplied AC adaptor. On the bottom of the control box is a mounting bracket to attach it to the Jibs and Cranes. Specifications: 3 sockets: 1 x 12V DC in socket, 2 x motor sockets Drive:  2 Custom-geared motors Maximum Camera Weight: 10kg Pan movement: 360 degree Tilt movement: 360 degree Fastest speed: 3.3rpm/min Slowest speed: 0.5rpm/min AC adapter input: AC 100-240V Output: DC 12V-2A Control cable length: 6 meters electronic pan and tilt head pro

-موتوربرقی پن وتیلت دورمتغیر۱۲ولت سوناک(خوش ساخت )

-تحمل وزن ۱۰کیلوگرم

-نصب سریع وآسان روی تمامی پروجیپها(بدون سوراخکاری)تا۶متر

Maximum Camera Weight: 10kg

  Pan movement: 360 degree

  Tilt movement: 360 degree

  Fastest speed: 3.3rpm/min

  Slowest speed: 0.5rpm/min

  AC adapter input: AC 100-240V

  Output: DC 12V-2A

  Control cable length: 6 meters