Beholder EC1

شناسه محصول: 1 دسته:
  • تضمین بهترین قیمت بازار
  • پشتیبانی عالی ۲۴ ساعته، ۷ روز هفته
  • بازگشت وجه در صورت عدم رضایت
  • اصالت کالاها از برترین برندها
  • تحویل سریع در کمترین زمان ممکن

تماس بگیرید!

EC1 Beholder 3-Axis Gimbal Stabilizer with Encoders


EC1 Beholder 3-Axis Gimbal Stabilizer with Encoders

for DSLR and Mirrorless Cameras

$749.99

MSRP: $849.99 (11% off)

SPECIAL Discount
Model: EC1

PROMOTION: $100 OFF MSRP!

Features

  • Durable All Aluminum Construction
  • 360 Degree Movement from All Axis (Pitch, Yaw & Roll)
  • Works with DSLR & Mirrorless Cameras between 2.0 to 4.5 lbs
  • Equipped with 3 Axis Gyro Stabilized Brushless Motors to Balance Most Mirrorless & DSLR Cameras
  • OLED Display Screen to show operating modes
  • Equipped with 32-Bit Controller & 12-Bit Encoder
  • Lithium Battery Powered- Low Maintenance, Eco-Friendly
  • Illuminated joystick indicating on-off status
  • 3/8"-16 Tripod Mount Socket
EC1

EC1

The Beholder EC1 is designed specifically for professional filmmakers looking for a single handheld stabilizer for a large range of medium and small cameras weighing up to 4.5 lbs. The Beholder EC1 is lightweight, easy to use, and can be carried in the supplied case or a small photographer bag.

360° Motors

The 3-Axis gimbal features three 360 degree rotating brushless motors that give you a limitless range of motion.
360 Motors

Designed for DSLR & Mirrorless Cameras

With a payload of up to 4.5 lbs., the EC1 has the ability to stabilize a wide range of today's popular DSLR and mirrorless cameras. Sony a6300, Sony a7SII, Panasonic GH4, and the Canon 5D Mark III are just a few cameras that the EC1 can handle.

Advanced Stabilization

Using a 32-bit controller with a 12-bit encoder, the EC1 uses an adaptive PID algorithm to produce a reliably efficient handheld stabilizer. Advanced Stabilization

Lock Mode

In Lock Mode, the Yaw, Pitch, and Roll axis work together to keep the camera pointed in one direction. The camera's composition will stay the same no matter how you move the handle. Lock Mode
Point & Lock

Point & Lock

Quickly lock your camera into any position by manually pointing and holding it in any direction. After a few seconds, the camera will lock and hold its position until it is reset back to default.
Auto Inversion

Auto Inversion

Switch to Inverted Mode at any time by simply flipping the handle over the camera. Inverted Mode can be operated in conjunction with any of the Lock and Follow Modes.
Auto Inversion

Multiple Follow Modes

The EC1 features 3 different follow modes. In Yaw-Axis Follow Mode, the EC1 will only follow your Pan movements. In Pitch and Yaw-Axis Follow mode, the EC1 will follow your Pan and Tilt Movements. Finally, the 3-Axis Follow Mode gives you full control allowing you to Pan, Tilt, and Roll.

Lock Mode

(Profile 1)

Lock ModeLock Mode will allow the camera to hold a certain direction, and will not follow, pan, or tilt.
Lock Mode

Pan-Follow Mode

(Profile 2)

Pan-Follow ModePan-Follow Mode allows the gimbal to follow pan axis, and hold the tilt position.
Pan-Follow Mode

Follow Mode

(Profile 3)

Follow ModeFollow Mode allows the camera to follow both tilt and pan directions.
Follow Mode

3-Axis Follow Mode

(Profile 4)

3-Axis Follow Mode3-Axis Follow Mode has no restrictions as it allows the camera to follow pan, tilt, and roll.
3-Axis Follow Mode
OLED Status Display

OLED Status Display

A display screen located on the back of the handle conveniently provides you with information on the battery life and operating mode.

Easy to Use

With a newly designed quick-release baseplate system, the EC1 is easy to balance without the need of any tools.
Easy to Use

Multiple Mounting Options

The EC1 handle comes with two 1/4-20 mounts that are perfect for mounting accessories such as a light, microphone, or monitor. A 3/8-16 thread located on the bottom allows you to securely mount the EC1 to a tripod, jib, or dual handle support system such as the Ikan DGH. Multiple Mounting Options Multiple Mounting Options
Beholder EC1 3 Axis Gimbal Balancing Tutorial Watch Julio Ramon from Ikan Corp balance the new Beholder EC1 3-axis handheld gimbal stabilizer for DSLR and Mirrorless cameras.

Ikan Recommendation

Choose your Gimbal Based on your Camera

EC12.0 - 4.5 lbs 907 - 1040g Payload Capacity
DS2 DS2-A4.0 lbs 1800g Payload Capacity
EC11.9 lbs 900g Payload Capacity

Ikan Lens Recommendations

  • Prime LensPrime Lens
  • Small Zoom LensSmall Zoom Lens
  • Telephoto LensTelephoto Lens
Small, lightweight lenses are recommended. Long or heavy lenses may be difficult to balance.
  • 360 Motors
  • Axis of Movement
  • Modes of Operation
  • Maximum Payload
  • Minimum Payload
  • DSLR Compatible
  • Mirorless Camera Compatible
  • Smartphone Compatible*
  • EC1
  • Yes
  • 3
  • 4
  • 4.5 lbs / 2041 g
  • 2.0 lbs
  • Yes
  • Yes
  • No
  • MS-PRO
  • Yes
  • 3
  • 4
  • 1.9 lbs / 900 g
  • 0 lbs
  • No
  • Yes
  • Yes
  • MD2
  • Yes
  • 3
  • 4
  • 6.6 lbs / 2994 g
  • .44 lbs
  • Yes
  • Yes
  • No
* Smartphone Adapter Not Included

3 - 4 Hours
8-10 Hours
Up to 20 Hours
18650, 3.7V, 2600mAh, Li-Ion Batteries
Most Mirrorless and DSLR Cameras
15.75 x 8.5 x 3.75 in.
400 x 215 x 95 mm
6 lbs
2.7 kg
847983019465
2.6 lbs
1.17 kg
360°
360°
360°

گیمبال (استابلیزر)برقی بی هولدر

چرخش۳۶۰درجه

دارای کفی باقابلیت نصب سریع

وزن۱٫۲کیلوگرم

تحمل وزن ۲۰۴۱گرم

قابلیت نصب ۲دسته

 

 

وزن 2.041 کیلوگرم
ابعاد 7.9 × 18.4 × 36.0 سانتیمتر
تحمل وزن بالاتردوربین نسبت به مدل قبلیDdj

تحمل وزن بالاترنسبت به مدل قبلی یعنی مدل beholder DC1